Order Products : sales@su-jiao.com
Thermoset Plastics SC-114
| Category: | Silicone , Silicone |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QGNbpy_Thermoset-Plastics-SC-114.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics SC-114 is a Silicone material filled with filler. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics SC-114 are:
Typical application of Thermoset Plastics SC-114: Wire & Cable |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 3.45 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 150 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 7.8E-4 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.34 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.2E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant | ASTM D150 | ||
| 100 Hz | 3.12 | ||
| 100 kHz | 3.10 | ||
| Dissipation Factor | ASTM D150 | ||
| 100 Hz | 8.4E-3 | ||
| 100 kHz | 1.8E-3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0 | ||
| Resin | Mix Ratio by Weight: 1.0 | ||
| Thermoset Mix Viscosity (25°C) | 2500 | cP | ASTM D2393 |
| Demold Time (25°C) | 480 to 720 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 801 TFE 5 | RTP Company | Acetal (POM) Copolymer | RTP |
| AZDEL™ C507-B01 | Azdel, Inc. | PP, Unspecified | AZDEL™ |
| Bergamid™ B70 G30 GR177 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| APEX® 65008 | Teknor Apex Company | PVC, Flexible | APEX® |
| POLYCHIM H 10 TB | POLYCHIM INDUSTRIES | PP Homopolymer | POLYCHIM |
