TECHNYL® A 218G2 V50 BLACK 34N Datasheet,Nylon 66,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® A 218G2 V50 Black 34N is a polyamide 66, reinforced with 50% of glass fiber, heat stabilized, for injection moulding. This grade has been specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of parts in permanent contact with such liquids.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 50% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic High Glycol Resistance Rigidity, high Good liquidity Hydrolysis resistance Ethylene glycol resistance Good demoulding performance
Uses	Application in Automobile Field
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA66-GF50

Physical	Dry	Conditioned	Unit	Test Method
Density	1.55	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	0.60	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	16200	12000	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	240	160	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	2.7	4.0	%	ISO 527-2
Flexural Modulus (23°C)	13500	10000	MPa	ISO 178
Flexural Stress (23°C)	350	270	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	15	--	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	95	97	kJ/m²	ISO 179/1eU

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	260	--	°C	ISO 75-2/Bf
1.8 MPa, not annealed	255	--	°C	ISO 75-2/Af
Melting Temperature	262	--	°C	ISO 11357-3

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
0.8 mm	HB	--		UL 94
1.6 mm	HB	--		UL 94
3.2 mm	HB	--		UL 94
Glow Wire Flammability Index				IEC 60695-2-12
0.8 mm	650	--	°C	IEC 60695-2-12
1.6 mm	650	--	°C	IEC 60695-2-12
3.2 mm	650	--	°C	IEC 60695-2-12

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.15	%
Rear Temperature	270 - 280	°C
Middle Temperature	280 - 290	°C
Front Temperature	280 - 300	°C
Mold Temperature	70 - 100	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QFQwSh_TECHNYLA218G2V50BLACK34N.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Taizhou Phenolic PF2A2-141	Taizhou Changxiong Plastic Co., Ltd.	Phenolic	Taizhou Phenolic
Wah Hong BMC 4122C	Wah Hong Industrial Corp.	TS, Unspecified	Wah Hong BMC
Ultramid® A3EG5	BASF Corporation	Nylon 66	Ultramid®
OmniCarb™ PC/PBT 1214	OMNI Plastics, LLC	PC+PBT	OmniCarb™
HIFOR® LT74151	Westlake Chemical Corporation	LLDPE	HIFOR®