Order Products : sales@su-jiao.com
Beetle® PET140
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Teknor Apex Company (Chem Polymer) |
| Trademark: | Beetle® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QEt0O5_Beetle-PET140.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PET140 is a modified PET extrusion grade specifically formulated for use in wire coating applications. It is highly pigmented to provide colour strength and opacity in thin coatings. It is also heat stabilised to allow for high temperature stress relieving operations. |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.32 - 1.48 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 1950 - 2500 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 60.0 - 80.0 | °C | ISO 75-2/A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Filler Content | 0.0 - 20 | % | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 140 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 260 - 300 | °C | |
| Cylinder Zone 3 Temp. | 260 - 300 | °C | |
| Cylinder Zone 5 Temp. | 260 - 300 | °C | |
| Melt Temperature | < 300 | °C |
| Extrusion instructions |
|---|
| Polyester grades are very sensitive to moisture content during processing. Suitable pre-drying is essential. Excess moisture causes rapid hydrolytic degradation of the melt and severe impairment of mechanical properties. Low melt viscosity & brittle product are often the key indicators. Vacuum or dehumidified air driers must be used. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® AY36WT6687 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| AKROMID® B3 GF 40 1 L black (4581) | AKRO-PLASTIC GmbH | Nylon 6+PP | AKROMID® |
| GAPEX® RPP10EA30BK | Ferro Corporation | PP Homopolymer | GAPEX® |
| Elastocon® 2865ST | Elastocon TPE Technologies | TPE | Elastocon® |
| LEXAN™ 131 resin | SABIC Innovative Plastics | PC | LEXAN™ |
