Order Products : sales@su-jiao.com
Borealis FR4845
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QDftS1_Borealis-FR4845.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FR4845 is an Irradiation Crosslinkable non-halogen flame retardant compound developed for the automotive wire market. FR4845 is intended for use as a 125°C rated primary insulation for crosslinked automotive wire. FR4845 in combination meets the applicable requirements as below when processed using sound extrusion and testing procedure:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.40 | g/cm³ | ASTM D792 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 13.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 180 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -40.0 | °C | ASTM D2863 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 550 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C, 60 Hz) | 3.70 | ASTM D150 | |
| Dissipation Factor (23°C, 60 Hz) | 0.010 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame test 2 | Pass | Multiple standards |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 | °C | |
| Drying Time | 2.0 - 8.0 | hr | |
| Cylinder Zone 1 Temp. | 127 | °C | |
| Melt Temperature | 160 - 165 | °C |
| Extrusion instructions |
|---|
| Barrel 6: 149°C |
| Note Message | |
|---|---|
| 1 . | Compound, 23° |
| 2 . | 20 AWG, 16 mil cable, ISO 6722/SAE J1128 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN T-50 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| PROTEQ™ X25H650 | Qenos Pty Ltd | PP, Unspecified | PROTEQ™ |
| ARBOFORM® L, V3 natur | TECNARO GmbH | CA | ARBOFORM® |
| Chemlon® 345 G | Teknor Apex Company (Chem Polymer) | Nylon 610 | Chemlon® |
| Gallonprene® GP520-5003 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
