Order Products : sales@su-jiao.com
Sypex S1420GN
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | Ginar Technology Co., LTD. |
| Trademark: | Sypex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QDeLWZ_Sypex-S1420GN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sypex S1420GN is a 20 % glass fiber reinforced SAN product for injection moulding in natural colour |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage - Flow (1.60 mm) | 0.10 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 83.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1.2 | % | ISO 527-2 |
| Flexural Modulus | 6380 | MPa | ISO 178 |
| Flexural Stress | 112 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 100 | °C | ASTM D648, ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Additional Information |
|---|
| Notched Izod Impact Strength, ISO 180/1, notch 0.25in: 59 J/m |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 215 - 235 | °C | |
| Middle Temperature | 215 - 235 | °C | |
| Front Temperature | 215 - 235 | °C | |
| Nozzle Temperature | 220 - 230 | °C | |
| Mold Temperature | 30.0 - 100 | °C | |
| Injection Pressure | 50.0 - 120 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 30.0 - 80.0 | MPa | |
| Back Pressure | 0.00 - 0.300 | MPa | |
| Screw Speed | 60 - 120 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ratron® 250 | Asia International Enterprise (Hong Kong) Limited | PESU | Ratron® |
| Tecoform® PO30 GB20 NL HS | Eurotec Engineering Plastics | Acetal (POM) Copolymer | Tecoform® |
| ADEKA EP-4005 | Adeka Corporation | Epoxy | ADEKA |
| HiFill® PA6/6 GF/M38 HS | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| HiFill® PA6 0301 | Techmer Engineered Solutions | Nylon 6 | HiFill® |
