Order Products : sales@su-jiao.com

ALKAMIX™ MB-6002

Category:	Unspecified , Unspecified
Manufacturer:	Marplex Australia Pty. Ltd.
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QCotGQ_ALKAMIX-MB-6002.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX™ MB-6002 is an Antiblock Masterbatch formulated with an antiblock additive concentration of 25 percent. ALKAMIX™ MB-6002 can be added to polyethylene during extrusion to reduce the blocking tendency of film. The level may vary according to desired properties, however the recommended addition level is between 1 and 3 percent. The maximum level of addition of ALKAMIX™ MB-6002 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any antiblock additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

Message

ALKAMIX™ MB-6002 is an Antiblock Masterbatch formulated with an antiblock additive concentration of 25 percent.

ALKAMIX™ MB-6002 can be added to polyethylene during extrusion to reduce the blocking tendency of film. The level may vary according to desired properties, however the recommended addition level is between 1 and 3 percent.

The maximum level of addition of ALKAMIX™ MB-6002 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any antiblock additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

General Information
Additive	Antiblock (25%)
Features	Antiblocking
Uses	Masterbatch

Physical	Nominal Value	Unit	Test Method
Density	> 0.980	g/cm³	ASTM D1505

Injection	Nominal Value	Unit
Processing (Melt) Temp	< 200	°C

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom PP6430 B9	Spartech Polycom	PP, Unspecified	Spartech
Geon™ Vinyl Rigid Extrusion 87771	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
POLYform C M90 GF30	Polykemi AB	Acetal (POM) Copolymer	POLYform C
OTECH ALLOY OTO9141LSZH - Riser Jacket	OTECH Corporation	TP, Unspecified	OTECH ALLOY
LEXAN™ 925AU resin	SABIC Innovative Plastics	PC	LEXAN™