Order Products : sales@su-jiao.com
SABIC® FORTIFY™ C1060D
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® FORTIFY™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QANTg6_SABICFORTIFYC1060D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® FORTIFY™ C1060D is an ethylene octene copolymer. This product is available as free flowing pellets. SABIC® FORTIFY™ C1060D is designed as a low density and high performance copolymer modifier to provide superior impact properties and flow characteristics. Typical applications are impact modifier in thermoplastic olefin compounds, footwear midsoles and wire and cable extrusion. Please take notice of specific storage and handling conditions. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.863 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mooney Viscosity (ML 1+4, 121°C) | 22 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 1 sec | 57 | ASTM D2240 | |
| Shaw D, 1 sec | 12 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant | 1.80 | MPa | ASTM D638 |
| Tensile Strength (Break) | 5.00 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 900 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 7.80 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 31.4 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -56.0 | °C | Internal method |
| Melting Temperature | 46.0 | °C | Internal method |
| Additional Information |
|---|
| All physical properties were measured on compression molded specimens. |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ACCULOY™ PCA083L | ACLO Compounders Inc. | PC+ABS | ACCULOY™ |
| Chemical Resources HD07960 | Chemical Resources, Inc. | HDPE | Chemical Resources |
| Geon™ BIO RC9000 | PolyOne Corporation | PVC, Flexible | Geon™ BIO |
| IROSTIC® S 6558 | Huntsman Corporation | TPU, Unspecified | IROSTIC® |
| LEXAN™ EXL1494T resin | SABIC Innovative Plastics | PC | LEXAN™ |
