Vipel® F013-AAB-00

Category:	Vinyl Ester , Vinyl Ester
Manufacturer:	AOC, L.L.C.
Trademark:	Vipel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Q70fX3_Vipel-F013-AAB-00.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Vipel Corrosion Resistant Bisphenol A, Epoxy Vinyl Ester Resins AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. Versatile Wide formulating capabilities allow for use in many processes and for optimization of cost/performance. Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts. Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat. Corrosion Resistant Vipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment. Food and Drug All resins in this datasheet are manufactured from raw materials that are listed in FDA regulation Title 21 CFR 177.2420. It is the fabricator's responsibility to also be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F/82°C for at least 4 hours. After post curing it should be washed with soap and water and rinsed.

Message

Vipel Corrosion Resistant Bisphenol A, Epoxy Vinyl Ester Resins

AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.

Versatile
Wide formulating capabilities allow for use in many processes and for optimization of cost/performance.

Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.

Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.

Corrosion Resistant
Vipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for
questions regarding suitability of a resin to any particular chemical environment.

Food and Drug
All resins in this datasheet are manufactured from raw materials that are listed in FDA regulation Title 21 CFR 177.2420. It is the fabricator's responsibility to also be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F/82°C for at least 4 hours. After post curing it should be washed with soap and water and rinsed.

General Information
Features	Alkali Resistant Crazing Resistant Food Contact Acceptable Good Chemical Resistance Good Corrosion Resistance Good Crack Resistance Good Toughness High Heat Resistance
Uses	Coating Applications Filaments
Agency Ratings	FDA 21 CFR 177.2420
Forms	Liquid
Processing Method	Filament Winding Hand Lay-up Pultrusion Spraying

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.05	g/cm³
Styrene Content	43	%

Thermoset	Nominal Value	Unit
Exotherm
Gel to Peak	18.0	min
Peak	177	°C
Gel Time (25°C) ¹	23.0	min

Hardness	Nominal Value	Unit	Test Method
Barcol Hardness	34		ASTM D2583

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3240	MPa	ASTM D638
Tensile Strength (Yield)	88.3	MPa	ASTM D638
Tensile Elongation (Break)	6.6	%	ASTM D638
Flexural Modulus	3650	MPa	ASTM D790
Flexural Strength	150	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	111	°C	ASTM D648

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity ²(25°C)	450	cP

Note Message
1 .	Gel time with 0.1% cobalt 6%, 0.1% DMA and 1.25% MEKP
2 .	Brookfield RV viscosity spindle 2 at 20 rpm

Resin Grade	Manufacturer	Category	Trademark
Pro PP-HO-HF-20T	Pro Polymers	PP Homopolymer	Pro-Comp™
SMOKEGUARD™ HP 700 NATURAL	AlphaGary	Fluoropolymer	SMOKEGUARD™ HP
Grilon® AG-30 H	EMS-GRIVORY	Nylon 66	Grilon®
Hifax BA65H	LyondellBasell Industries	PP Copolymer	Hifax
HANWHA KL-31	Hanwha Chemical	PVC, Unspecified	HANWHA