Order Products : sales@su-jiao.com
Braskem PP HP 427J
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Q0b86O_Braskem-PP-HP-427J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HP 427J is a low fluidity homopolymer with good processability. The product is suitable for both as monolayer and coextruded structures. It does not contain any slip or anti-blocking agents. Applications: BOPP films with greater retention in treatment over the metallized layer. Processing: Bioriented Film (BOPP) |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 33.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 35 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC9TPZ (Series: GP/AP) | KRAIBURG TPE | TPE | THERMOLAST® K |
| ULTEM™ 2410R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| LOFEX® A311A | Lotte Chemical Corporation | PET | LOFEX® |
| S.O.E.™ S1605 | AKelastomers | SBC | S.O.E.™ |
| Sylvin 5132-75 Clear Red 6191 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
