Order Products : sales@su-jiao.com
Formolene® 2706N
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Q0MGWg_Formolene-2706N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 2706N is a copolymer of polypropylene designed and formulated for injection molding applications. It contains a unique combination of stabilizers, nucleators and antistats, which give it an excellent balance of stiffness and impact strength. Formolene 2706N offers advantages in both processing and physical properties for applications including pails, crates and other Material Handling. Formolene® 2706N complies with the U. S. Food and Drug Administration regulation 21 CFR 177.1520(c)(3.4). This material may only be used in contact with foods of type I, II, III, IV-B, VI, VII, VIII and IX as described in Table 1 of 21 CFR 176.170(c) |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 7.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 862 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, Injection Molded | 140 | J/m | |
| -18°C, Injection Molded | 160 | J/m | |
| 0°C, Injection Molded | 730 | J/m | |
| 23°C, Injection Molded | 750 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 85.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ GV-819.G001-8065 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| TIPPLEN® H 650 F | MOL Petrochemicals Co. Ltd. | PP Homopolymer | TIPPLEN® |
| TPUCO® TPUI-T90 | Taiwan PU Corporation | TPU-Polyester | TPUCO® |
| Grilon® BZ 3 | EMS-GRIVORY | Nylon 6 | Grilon® |
| INTEGRAL™ D305 | The Dow Chemical Company | Polyolefin, Unspecified | INTEGRAL™ |
