Order Products : sales@su-jiao.com
TRIBOCOMP® PA612 GF30 TS0
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | EPIC Polymers |
| Trademark: | TRIBOCOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PyXNum_TRIBOCOMP-PA612-GF30-TS0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIBOCOMP® PA612 GF30 TS0 is a Polyamide 612 (Nylon 612) product filled with 30% glass fiber and 15% ptfe fiber. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.43 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.20 | -- | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.20 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 8700 | -- | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 135 | -- | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 3.0 | -- | % | ISO 527-2 |
| Flexural Modulus (23°C) | 8500 | -- | MPa | ISO 178 |
| Flexural Stress (23°C) | 190 | -- | MPa | ISO 178 |
| Coefficient of Friction | ASTM D3702 | |||
| vs. Itself - Dynamic | 0.31 | -- | ||
| vs. Itself - Static | 0.25 | -- | ||
| Wear Factor | 17 | -- | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 13 | -- | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 65 | -- | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 210 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 195 | -- | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 3.0E-5 | -- | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.28 | -- | W/m/K | ISO 22007 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+12 | -- | ohms | ASTM D257 |
| Electric Strength | 36 | 32 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 500 | 500 | V | IEC 60112 |
| Extrusion | Dry | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 220 to 250 | °C | |
| Cylinder Zone 2 Temp. | 220 to 260 | °C | |
| Cylinder Zone 3 Temp. | 225 to 270 | °C | |
| Cylinder Zone 4 Temp. | 230 to 280 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 5132-80 Clear 876 | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| ASTADUR™ B4300G6-UV | Marplex Australia Pty. Ltd. | PBT | ASTADUR™ |
| GAPEX® RPP20EA90NA | Ferro Corporation | PP Homopolymer | GAPEX® |
| elitel UE3370 | UNITIKA Plastics Division | TPC-ET | elitel |
| Lucon® CP6050 | LG Chem Ltd. | PC+ABS | Lucon® |
