Order Products : sales@su-jiao.com
Polifil® Nylon 628L-13GF
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | The Plastics Group |
| Trademark: | Polifil® Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PyDgc4_Polifil-Nylon-628L-13GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polifil® Nylon 628L-13GF is a Polyamide 66 (Nylon 66) product. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 1.1 | % | |
| Saturation | 7.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 96.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Modulus | 4830 | MPa | ASTM D790 |
| Deformation Under Load (50°C, 14 MPa) | 1.10 | % | ASTM D621 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 243 | °C | ASTM D648 |
| Melting Temperature | 252 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 282 | °C | |
| Middle Temperature | 274 | °C | |
| Front Temperature | 271 | °C | |
| Nozzle Temperature | 260 to 299 | °C | |
| Processing (Melt) Temp | 279 to 304 | °C | |
| Mold Temperature | 71.1 to 82.2 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 to 1.03 | MPa | |
| Screw Speed | 50 to 80 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prixene® EM050E36 | POLYMAT | LLDPE | Prixene® |
| Ultraform® N 2310 P | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Ad-Tech Polyester NO. 19A | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| Formolene® L42009A | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| HyTemp® 4051CG | Zeon Chemicals L.P. | Acrylic, Unspecified | HyTemp® |
