Order Products : sales@su-jiao.com

Formolene FORMAX® L91720B

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Formosa Plastics Corporation, U.S.A.
Trademark:	Formolene FORMAX®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PxmWbD_FormoleneFORMAXL91720B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Formolene FORMAX® L91720B is a superior strength linear low density polyethylene. Film mechanical properties are comparable to premium strength LLDPE film resins.

Formolene FORMAX® L91720B is a barefoot resin for use in high performance film applications offering excellent extrusion processing and outstanding impact strength and tear resistance. Films exhibit good optical properties.

Formolene FORMAX® L91720B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Suggested Applications:

Industrial Packaging

Industrial Liners

Food Packaging

Stretch Film

Can Liners

Consumer Trash Bags

Coextrusion

General Information
Features	High strength Optical Impact resistance, good Workability, good Good tear strength Compliance of Food Exposure No additive
Uses	Packaging Lining Bags Industrial application Stretch winding Food packaging
Agency Ratings	EC 1907/2006 (REACH) FDA 21 CFR 177.1520
Processing Method	Film extrusion Co-extrusion molding

Physical	Nominal Value	Unit	Test Method
Density	0.917	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	20	µm
Tensile Strength			ASTM D882
MD : Yield, 20 µm, blown film	9.31	MPa	ASTM D882
TD : Yield, 20 µm, blown film	9.17	MPa	ASTM D882
MD : Broken, 20 µm, blown film	35.9	MPa	ASTM D882
TD : Broken, 20 µm, blown film	25.5	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Broken, 20 µm, blown film	540	%	ASTM D882
TD : Broken, 20 µm, blown film	770	%	ASTM D882
Dart Drop Impact (20 µm, Blown Film)	300	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD : 20 µm, blown film	270	g	ASTM D1922
TD : 20 µm, blown film	440	g	ASTM D1922

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SFW6000	Teknor Apex Asia Pacific PTE. LTD.	PVC, Flexible	Sinvicomp
Small Boss HS-105-3	Tongxiang Small Boss Special Plastic Products Co., Ltd.	PVC, Unspecified	Small Boss
NuSil R-1505	NuSil Technology	Silicone	NuSil
Ekalon® 26 E I S V	Sattler KunststoffWerk GmbH	PC	Ekalon®
Rotuba CAB B932 (4% Plasticizer)	Rotuba Extruders, Inc.	CAB	Rotuba CAB