Order Products : sales@su-jiao.com
Marlex® PP HLS-080SP
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Saudi Polymers Company |
| Trademark: | Marlex® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PsqWiN_Marlex-PP-HLS-080SP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Typical quenched blown or cast film extrusion applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.904 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (shaw d, 3.20mm, injection molding) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 37.0 | MPa | ASTM D638 |
| Flexural Modulus - Secant 2(3.20 mm, Injection Molded) | 1690 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm, Injection Molded) | 100 | °C | ASTM D648 |
| Additional Information |
|---|
| Mechanical properties were determined using injection-moulded specimens 3.2 mm thick, moulded per ASTM D4101, unless otherwise noted. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2590A | Teknor Apex Company | TPE | Telcar® |
| Karina CLEAR PVC COMPOUND 78/202-IS-RG | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| LNP™ THERMOCOMP™ LC004XXP compound | SABIC Innovative Plastics Europe | PEEK | LNP™ THERMOCOMP™ |
| HIFOR Xtreme® SC74877 | Westlake Chemical Corporation | LLDPE | HIFOR Xtreme® |
| Dow Corning® QP1-270 | Dow Corning Corporation | Silicone | Dow Corning® |
