Order Products : sales@su-jiao.com
CERTENE™ LDI-918
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Pshz87_CERTENE-LDI-918.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LDI-918 is a certified prime grade low density polyethylene resin with a medium melt index (MI), especially designed for use in color concentrate and masterbatches, where its flow properties and rheology ensure improved processability and uniform dispersion of additives. LDI-918 can be used in injection molding applications, such as: caps, food packaging containers, closures, housewares product, compound and materbatch resin. LDI-918 could be used to make injection molding products to get outstanding balance of processability and end user performance. The resin does not contain the thermal stabilizer and LDI-918 complies with FDA regulation 21CFR 177.1520(c3).1a / 3.2a, and most international regulations for use in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.2 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 10.5 | MPa | ASTM D638 |
| Fracture | 8.00 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 33 | % | ASTM D638 |
| Fracture | 210 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 2 | 221 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact (23°C) | 24.4 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 86.0 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 110 | °C | Internal method |
| Additional Information |
|---|
| Test made on injection molded Type 1 tension test specimen according to ASTM D 4703, procedure C. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 66 A12^ F20 | Polykemi AB | Nylon 66 | SCANAMID 66 |
| Ultraform® N 2320 003 UNC Q600 | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| Borealis PE MG9647S | Borealis AG | HDPE | Borealis PE |
| Hostacom M4 N01 LW92341 | LyondellBasell Industries | PP Homopolymer | Hostacom |
| ADVANCENE™ EM-4810-AAH | ETHYDCO | HDPE, HMW | ADVANCENE™ |
