Order Products : sales@su-jiao.com
Reon 67GEF01
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Reon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PsYFew_Reon-67GEF01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 67GEF01 is a medium molecular weight suspension type PVC resin suitable for manufacturing plasticised extruded as well as moulded products. It is specially recommended for insulation / sheathing of wires and cables, calendering, flexible films, other flexible extruded products, injection moulding, etc. The low RVCM level in the resin makes it ideal for medical and food contact applications. Its combination of medium molecular weight with high porosity leads to low powder mix time with good plasticiser absorption, resulting in easy processability. 67GEF01 is therefore suitable for processing of flexible products with good mechanical properties and high output rate. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.53 | g/cm³ | ASTM D1895 |
| K-Value 1 | 67.0 | ||
| Inherent Viscosity | 0.92 | ASTM D1243 | |
| Particle Size - Retention on ASTM 30 mesh | < 0.00500 | % | |
| Particle Size Distribution | ASTM D1921 | ||
| Retention on ASTM 40 mesh | < 0.10 | % | |
| Retention on ASTM 60 mesh | < 5.0 | % | |
| Through ASTM 140 mesh | < 25 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Loss | < 0.30 | % | ASTM D3030 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dark Resin - for 100 g resin | < 10.0 | count/g | |
| Electrical Conductivity | < 2.00 | µS/cm/g | ASTM D1755 |
| Fish Eye | < 10.0 | ||
| Flow Time | < 25.0 | sec | ASTM D1895 |
| Porosity - DOP | 0.300 to 0.360 | cm³/g | ASTM D3367 |
| Residual Vinyl Chloride Monomer | < 2 | ppm | ASTM D3749 |
| Note Message | |
|---|---|
| 1 . | @ 1% in cyclohexanone |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® STAMAX 40YM240 resin | SABIC Innovative Plastics | PP, Unspecified | SABIC® STAMAX |
| Vi-Chem PVC V330-70 | Vi-Chem Corporation | PVC, Unspecified | Vi-Chem PVC |
| UBESTA 3035 LU1 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| LNP™ LUBRILOY™ RF203H compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRILOY™ |
| LNP™ THERMOTUF™ PF008IR compound | SABIC Innovative Plastics | Nylon 6 | LNP™ THERMOTUF™ |
