Order Products : sales@su-jiao.com
SureSpec LLSC6-007
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PsG3MI_SureSpec-LLSC6-007.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLSC6-007 is a Super Hexene Copolymer certified prime resin developed for blown film with outstanding Impact Strength and Toughness. LLSC6-007 features good processability and exhibits exceptional Elmendorf Tear strength and Puncture resistance. LLSC6-007 complies with FDA regulation 21CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. LLSC6-007 also complies with most international regulations concerning the use of Polyethylene in contact with food articles. AVAILABLE ADDITIVES B = Barefoot A = 0 slip/ High Antiblock F = Full Additives |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.90 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 8.96 | MPa | |
| TD : Yield, 25 µm | 8.96 | MPa | |
| MD : Break, 25 µm | 40.7 | MPa | |
| TD : Break, 25 µm | 33.1 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 690 | % | |
| TD : Break, 25 µm | 960 | % | |
| Dart Drop Impact (25 µm) | 550 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 420 | g | |
| TD : 25 µm | 680 | g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fortron® 1140E7 | Celanese Corporation | PPS | Fortron® |
| Greenflex® ML 40 | Versalis S.p.A. | EVA | Greenflex® |
| KOPLA PA66 KDE1020 | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
| INEOS PP L24G-00 | INEOS Olefins & Polymers USA | PP Impact Copolymer | INEOS PP |
| Moplen HP525J | PolyMirae | PP Homopolymer | Moplen |
