Order Products : sales@su-jiao.com
TYNE® Olefins W7401
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Tyne Plastics LLC. |
| Trademark: | TYNE® Olefins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PrzkXN_TYNE-Olefins-W7401.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Data was measured on natural colored test specimens. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.5 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.060 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 26.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 40 | % | ASTM D638 |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 370 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® MDPE R40039E | SABIC Americas, Inc. | MDPE | SABIC® MDPE |
| TECHNIACE® F-101 | Nippon A&L Inc. | PC+ABS | TECHNIACE® |
| DOW™ LDPE PG 7004 (Injection Molding) | The Dow Chemical Company | LDPE | DOW™ LDPE |
| INVISION™ TX 5173U | A. Schulman Inc. | TPV | INVISION™ |
| Monprene® SP-19985 XRD2 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
