Order Products : sales@su-jiao.com
Monprene® OM-10176
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PqVko7_Monprene-OM-10176.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene® OM-10176 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 78 | ||
| Shore A, 5 sec | 76 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 6.89 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Adhesion to Nylon |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 204 to 232 | °C | |
| Middle Temperature | 210 to 232 | °C | |
| Front Temperature | 216 to 238 | °C | |
| Nozzle Temperature | 221 to 243 | °C | |
| Processing (Melt) Temp | 221 to 243 | °C | |
| Mold Temperature | 23.9 to 60.0 | °C | |
| Injection Pressure | 1.38 to 6.89 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 to 0.862 | MPa | |
| Screw Speed | 50 to 120 | rpm | |
| Cushion | 3.81 to 25.4 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Elastron® V V201.A90.B | Elastron USA, Inc. | TPV | Elastron® V |
| Escorene™ Ultra LD 768.MJ Molding | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| VisiJet® FTX Gray | 3D Systems | Unspecified | VisiJet® |
| Versaflex™ Versaflex™ HC 1100-40 Translucent EU | PolyOne Corporation | TPE | Versaflex™ |
| Sylvin 9600-95 Clear 876 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
