Order Products : sales@su-jiao.com
DynaChar™ 145-BRD
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaChar™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PoEhH5_DynaChar-145-BRD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Detectable PP Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 24.1 | MPa | |
| Break | 19.3 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 7.0 to 9.0 | % | |
| Break | > 30 | % | |
| Flexural Modulus | 1000 | MPa | ASTM D790 |
| Flexural Strength | 27.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 32 to 43 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Rear Temperature | 193 to 216 | °C | |
| Middle Temperature | 199 to 221 | °C | |
| Front Temperature | 204 to 232 | °C | |
| Nozzle Temperature | 204 to 232 | °C | |
| Processing (Melt) Temp | 204 to 232 | °C | |
| Mold Temperature | 15.6 to 43.3 | °C | |
| Injection Rate | Moderate | ||
| Screw Speed | 20 to 100 | rpm | |
| Clamp Tonnage | 4.1 to 6.9 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MarFlex® HHM TR-258 | Chevron Phillips Chemical Company LLC | LLDPE | MarFlex® |
| Nylfor® R 6 CA/20 E3 EV GREY 7102/1 | SO.F.TER. SPA | Nylon 6 | Nylfor® |
| Expandable PS RF33W-n | INEOS Styrenics International SA | PS (EPS) | Expandable PS |
| Kepex® 3315GFS | Korea Engineering Plastics Co., Ltd | PBT | Kepex® |
| LNP™ THERMOCOMP™ RF0039S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
