Order Products : sales@su-jiao.com
LNP™ LUBRICOMP™ DFL28EG compound
| Category: | PC , Polycarbonate |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ LUBRICOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PnrzrT_LNP-LUBRICOMP-DFL28EG-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP* LUBRICOMP* DFL28EG is a compound based on Polycarbonate resin containing 40% Glass Fiber/Milled Glass and 10% PTFE. Added features of this material are: Wear Resistant, Easy Molding. Also known as: LNP* LUBRICOMP* Compound DFL-4028 EM MG Product reorder name: DFL28EG |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D792 | ||
| -- | 1.62 | g/cm³ | |
| -- | 1.61 | g/cm³ | |
| Molding Shrinkage - Across Flow (24 hr) | 0.30 to 0.60 | % | ASTM D955 |
| Water Absorption | |||
| 24 hr, 50% RH | 0.080 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.12 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 11000 | MPa | ASTM D638 |
| -- | 10200 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield 2 | 115 | MPa | ASTM D638 |
| Yield | 116 | MPa | ISO 527-2/5 |
| Break 3 | 115 | MPa | ASTM D638 |
| Break | 116 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Yield 4 | 1.9 | % | ASTM D638 |
| Yield | 1.9 | % | ISO 527-2/5 |
| Break | 0.0 | % | ASTM D638 |
| Break 5 | 1.9 | % | ASTM D638 |
| Break | 2.0 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0 mm Span 6 | 9860 | MPa | ASTM D790 |
| -- 7 | 9780 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 174 | MPa | ISO 178 |
| Yield, 50.0 mm Span 8 | 176 | MPa | ASTM D790 |
| Break, 50.0 mm Span 9 | 176 | MPa | ASTM D790 |
| Coefficient of Friction | ASTM D3702 Modified | ||
| vs. Itself - Dynamic | 0.61 | ||
| vs. Itself - Static | 0.58 | ||
| Wear Factor | ASTM D3702 Modified | ||
| Ring | 2.60 | 10^-10 in^5-min/ft-lb-hr | |
| Washer | 45.0 | 10^-10 in^5-min/ft-lb-hr |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 130 | J/m | ASTM D256 |
| 23°C 10 | 12 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 650 | J/m | ASTM D4812 |
| 23°C 11 | 41 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 19.9 | J | ASTM D3763 |
| -- | 4.80 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 141 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 12 | 141 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 140 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 13 | 139 | °C | ISO 75-2/Af |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 293 to 304 | °C | |
| Middle Temperature | 310 to 321 | °C | |
| Front Temperature | 321 to 332 | °C | |
| Processing (Melt) Temp | 304 to 327 | °C | |
| Mold Temperature | 82.2 to 110 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | Type I, 5.0 mm/min |
| 5 . | Type I, 5.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 2.0 mm/min |
| 8 . | 1.3 mm/min |
| 9 . | 1.3 mm/min |
| 10 . | 80*10*4 |
| 11 . | 80*10*4 |
| 12 . | 80*10*4 mm |
| 13 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pyramid™ PEEK KD2000-G01 | Polymics, Ltd. | PEEK | Pyramid™ PEEK |
| Spartech Polycom SC7-70906U | Spartech Polycom | PC | Spartech |
| Ultra Purge PLUS | Moulds Plus International USA, Inc. | Proprietary | Ultra Purge |
| Dow ENDURANCE™ HFDA-0800 BK EC | The Dow Chemical Company | TP, Unspecified | Dow ENDURANCE™ |
| INTENE® 60 AF | Versalis S.p.A. | PBR, Low Cis | INTENE® |
