Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic PFA 6502TZ

Category:	PFA , Perfluoroalkoxy
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PnaWog_3M-Dyneon-Fluoroplastic-PFA-6502TZ.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
3M™ Dyneon™ Fluoroplastic PFA 6502TZ is a fully fluorinated copolymer of TFE & PPVE. The resin has been developed for the transfer molding and extrusion of claddings and linings. The easier processing under low shear rates was one goal and also 3M™ Dyneon™ PFA 6502T Z Fluorothermoplastic was designed to be used in roughest environments, e. g. in the chemical industry, where high strength and extreme thermal and chemical resistance are required. Features Broad processing window Improved mold release property Improved stress crack resistance Smooth surfaces High transparency Process targets: Transfer molding and extrusion

Message

3M™ Dyneon™ Fluoroplastic PFA 6502TZ is a fully fluorinated copolymer of TFE & PPVE. The resin has been developed for the transfer molding and extrusion of claddings and linings. The easier processing under low shear rates was one goal and also 3M™ Dyneon™ PFA 6502T Z Fluorothermoplastic was designed to be used in roughest environments, e. g. in the chemical industry, where high strength and extreme thermal and chemical resistance are required.

Features

Broad processing window

Improved mold release property

Improved stress crack resistance

Smooth surfaces

High transparency

Process targets: Transfer molding and extrusion

General Information
Features	Copolymer Good Chemical Resistance Good Mold Release High Clarity High Heat Resistance High Strength
Uses	Liners
Forms	Pellets
Processing Method	Blow Molding Compression Molding Extrusion Resin Transfer Molding

Physical	Nominal Value	Unit	Test Method
Density	2.15	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	2.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	60		ASTM D2240, ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, 23°C)	30.0	MPa	ISO 527-1
Tensile Strain (Break, 23°C)	400	%	ISO 527-1
Flexural Modulus	550	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	310	°C	ISO 12086

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	> 95	%	ASTM D2863

Extrusion	Nominal Value	Unit
Melt Temperature	< 400	°C

Resin Grade	Manufacturer	Category	Trademark
Premi-Glas® 2207-20 CR-SX	Premix, Inc.	TS, Unspecified	Premi-Glas®
RX® 613	Sumitomo Bakelite North America, Inc.	Phenolic	RX®
New-prene™ 8180B	Total Polymer Vision (Suzhou) Co., LTD	PP+EPDM	New-prene™
INEOS PP 203-OR25	INEOS Olefins & Polymers Europe	PP Random Copolymer	INEOS PP
Lionpol HC-204539	Lion Polymers Incorporated	TPE	Lionpol