Order Products : sales@su-jiao.com

Hytrel® 6356

Category:	TPC-ET , THERMOPLASTIC POLYESTER ELASTOMER
Manufacturer:	DuPont Performance Polymers
Trademark:	Hytrel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PnReyx_Hytrel-6356.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
63 Shore D High Performance Polyester Elastomer

General Information
Additive	UV Stabilizer
Uses	Film Profiles Sheet
Agency Ratings	UL Unspecified Rating
Forms	Pellets
Processing Method	Casting Extrusion Film Extrusion Injection Molding Profile Extrusion Sheet Extrusion Thermoforming
Multi-Point Data	Creep Modulus vs. Time (ISO 11403-1) Isochronous Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (ISO 11403-1) Isothermal Stress vs. Strain (TPE) (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Stress vs. Shear Rate (ISO 11403-1) Specific Volume vs Temperature (ISO 11403-2) Tensile Modulus vs. Temperature, Dynamic (ISO 11403-1) Viscosity vs. Shear Rate (ISO 11403-2)
Part Marking Code (ISO 11469)	>TPC-ET<
Resin ID (ISO 1043)	TPC-ET

Physical	Nominal Value	Unit	Test Method
Density	1.22	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	9.0	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)	8.50	cm³/10min	ISO 1133
Molding Shrinkage			ISO 294-4
Across Flow	1.5	%
Flow	1.5	%
Water Absorption
24 hr	0.50	%	ASTM D570
23°C, 24 hr, 2.00 mm	0.60	%	ISO 62
Equilibrium, 23°C, 2.00 mm, 50% RH	0.20	%	ISO 62

Hardness	Nominal Value	Unit	Test Method
Shore Hardness			ISO 868
Shore D	63
Shore D, 15 sec	57

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	280	MPa	ISO 527-2
Tensile Stress			ISO 527-2
Yield	19.0	MPa
Break	43.0	MPa
5.0% Strain	12.0	MPa
10% Strain	15.0	MPa
50% Strain	18.8	MPa
100% Strain	19.0	MPa
Tensile Strain			ISO 527-2
Yield	33	%
Break	> 300	%
Nominal Tensile Strain at Break	500	%	ISO 527-2
Tensile Creep Modulus			ISO 899-1
1 hr	248	MPa
1000 hr	182	MPa
Flexural Modulus	290	MPa	ISO 178
Abrasion Resistance	110	mm³	ISO 4649

Fill Analysis	Nominal Value	Unit	Test Method
Specific Heat Capacity of Melt	2150	J/kg/°C
Thermal Conductivity of Melt	0.15	W/m/K

Additional Information	Nominal Value	Unit	Test Method
Effective Thermal Diffusivity	0.0544	cSt
Emission of Organic Compounds	2.50	µgC/g	VDA 277
Odor	2.5		VDA 270

Elastomers	Nominal Value	Unit	Test Method
Tear Strength			ISO 34-1
Across Flow	150	kN/m
Flow	160	kN/m

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-40°C	15	kJ/m²
-30°C	25	kJ/m²
23°C, Partial Break	120	kJ/m²
Notched Izod Impact Strength			ISO 180/1A
-40°C	19	kJ/m²
23°C	81	kJ/m²
Tensile Impact Strength (23°C)	300	kJ/m²	ISO 8256/1

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, Unannealed	80.0	°C	ISO 75-2/B
1.8 MPa, Unannealed	45.0	°C	ISO 75-2/A
Brittleness Temperature	-96.0	°C	ISO 974
Glass Transition Temperature ¹	0.00	°C	ISO 11357-2
Vicat Softening Temperature
--	195	°C	ISO 306/A50
--	100	°C	ISO 306/B50
Melting Temperature ²	210	°C	ISO 11357-3
CLTE			ISO 11359-2
Flow	1.8E-4	cm/cm/°C
Flow : -40 to 23°C	1.5E-4	cm/cm/°C
Transverse	1.8E-4	cm/cm/°C
Transverse : -40 to 23°C	1.5E-4	cm/cm/°C

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.0E+15	ohms	IEC 60093
Volume Resistivity	8.0E+13	ohms·cm	IEC 60093
Electric Strength	20	kV/mm	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	4.60
1 MHz	4.10
Dissipation Factor			IEC 60250
100 Hz	0.012
1 MHz	0.036

Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
1.50 mm	HB
3.00 mm	HB
Oxygen Index	21	%	ISO 4589-2

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density	1.06	g/cm³

Note Message
1 .	10°C/min
2 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
Radiflam® S RV300 HF 333 NER 1531	Radici Plastics	Nylon 6	Radiflam®
Royalene® 697	Lion Copolymer, LLC	EPDM	Royalene®
Stanyl® TS256F8	DSM Engineering Plastics	Nylon 46	Stanyl®
Thermx® TE4005	Celanese Corporation	PCT	Thermx®
EPO-TEK® H73	Epoxy Technology Inc.	Epoxy	EPO-TEK®