Order Products : sales@su-jiao.com

DIGITALWAX® DL 260

Category:	Unspecified , Unspecified
Manufacturer:	DWS Systems
Trademark:	DIGITALWAX®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PnHm2k_DIGITALWAX-DL-260.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Photosensitive Resin for DigitalWax® X Series Stereolithography Systems DL 260 Moulding Resin is a nano-filled ceramic resin specially developed for rubber moulding applications, including VLT, liquid silicones and vulcanized rubber at medium-low temperatures (max. 90°C). DL260 Moulding Resin is suitable both for thin and thick models. DL260 Moulding Resin can be used to make rubber moulds with liquid silicones and rubber vulcanized at a maximum temperature of 90°C. Models made of DL260 resin can be removed easily from the rubber mould and they can also be broken, allowing you to carry out some difficult cuts that would be even impossible with a metal model. DL260 delivers extremely smooth surfaces and exceptionally precise and sharp details. Features Smooth surface High resolution High accuracy No further manual finishing needed

Message

Photosensitive Resin for DigitalWax® X Series Stereolithography Systems

DL 260 Moulding Resin is a nano-filled ceramic resin specially developed for rubber moulding applications, including VLT, liquid silicones and vulcanized rubber at medium-low temperatures (max. 90°C).

DL260 Moulding Resin is suitable both for thin and thick models. DL260 Moulding Resin can be used to make rubber moulds with liquid silicones and rubber vulcanized at a maximum temperature of 90°C. Models made of DL260 resin can be removed easily from the rubber mould and they can also be broken, allowing you to carry out some difficult cuts that would be even impossible with a metal model. DL260 delivers extremely smooth surfaces and exceptionally precise and sharp details.

Features

Smooth surface

High resolution

High accuracy

No further manual finishing needed

General Information
Filler / Reinforcement	Unspecified Nano
Features	Filled Good Mold Release Good Surface Finish
Uses	Modeling Material Mold Making Thick-walled Parts Thin-walled Parts
Appearance	Blue Opaque
Forms	Liquid
Processing Method	3D Printing, Stereolithography

Physical	Nominal Value	Unit
Viscosity ¹(25°C)	1.50 to 2.20	Pa·s

Hardness	Nominal Value	Unit
Durometer Hardness (Shore D)	88

Mechanical	Nominal Value	Unit
Flexural Modulus	1820	MPa
Flexural Strength	73.1	MPa

Note Message
1 .	Liquid Resin

Resin Grade	Manufacturer	Category	Trademark
Nipol® SBR 1739	Zeon Corporation	SBR, Emulsion	Nipol® SBR
Diakon® CLG903	Lucite International Inc.	Acrylic (PMMA)	Diakon®
ExxonMobil™ LLDPE LL 3402.48 Blown	ExxonMobil Chemical	LLDPE	ExxonMobil™ LLDPE
LNP™ THERMOCOMP™ Lexan_LGN2000A compound	SABIC Innovative Plastics Europe	PC	LNP™ THERMOCOMP™
EPAMOULD 786A34	Epaflex Polyurethanes S.R.L.	TPU-Polyether	EPAMOULD