Order Products : sales@su-jiao.com

Mirakutoran® TPU H895FNAT

Category:	TPU Alloy , Thermoplastic Polyurethane Elastomer Alloy
Manufacturer:	Japan Mirakutoran Inc.
Trademark:	Mirakutoran® TPU
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PmWbbE_Mirakutoran-TPU-H895FNAT.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Our TPU "Mirakutoran ®" has the following outstanding features.

Has excellent wear resistance

Tensile strength, high mechanical strength and tear strength

Is a wide range of hardness

High impact strength

Oil resistance and good chemical resistance

Excellent low temperature properties, weather resistance, ozone resistance and is also good

Flexible rubber elastic, vibration-effective silencing

Compared to other urethane elastomer thermoplastic that is more

Playback can be processed

Vulcanization process without curing reaction, very high productivity

Resins and other polymer is easy

Solution is easily dissolved in solvent process

Mirakutoran to the standard type E and P are two types.

Type E has a certain cross-linked structure in the molecule, and excellent mechanical strength and compression set. P type is characterized by good liquidity linear structure

General Information
Features	Low compressive deformability Shock absorption Impact resistance, good Good strength Good flexibility Good tear strength Ozone resistance Low temperature resistance Good chemical resistance Good wear resistance Good weather resistance Heat resistance, high Oil resistance

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.21	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness			ASTM D2240
Shore A, 23°C, 2.00mm, injection molding	93 - 97		ASTM D2240
Shore D, 23°C, 2.00mm, injection molding	46		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% strain, 23°C, 2.00mm)	14.7	MPa	ASTM D412
Tensile Strength ²(Yield, 23°C, 2.00 mm)	43.0	MPa	ASTM D412
Tensile Elongation ³(Break, 23°C, 2.00 mm)	500	%	ASTM D412
Tear Strength ⁴(23°C, 2.00 mm)	147	kN/m	ASTM D624
Compression Set (70°C, 22 hr)	22	%	ASTM D395

Additional Information
Test Methods: JIS K7311, K6262, K7206

Note Message
1 .	300 mm/min
2 .	300 mm/min
3 .	300 mm/min
4 .	300 mm/min

Resin Grade	Manufacturer	Category	Trademark
Smooth-Sil® 935	Smooth-On, Inc	Silicone	Smooth-Sil®
Ferro PP LPP30BK52NA	Ferro Corporation	PP, Unspecified	Ferro PP
Golden Compound PP S²PC 3545 BO	Golden Compound GmbH	PP, Unspecified	Golden Compound
EMERGE™ PC/ABS 7570	Trinseo	PC+ABS	EMERGE™
PENTAMID A GV20 GK10 H natural	PENTAC Polymer GmbH	Nylon 66	PENTAMID A