Order Products : sales@su-jiao.com
Petrothene® NA206000 (Injection Molding)
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PkY9is_PetrotheneNA206000InjectionMolding.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Petrothene NA206000 is selected by customers for specialty molding applications in closures, toys and automotive areas where a balance of softness and toughness, with good processability and excellent dimensional stability is desired. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 14 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 10.0 | MPa | ASTM D638 |
| Fracture | 9.93 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 15 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% secant | 207 | MPa | ASTM D790 |
| 2% secant | 186 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -74.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 86.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 163 | °C | |
| Middle Temperature | 177 | °C | |
| Front Temperature | 177 | °C | |
| Nozzle Temperature | 177 | °C |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® N-333 NF3001 | BASF Corporation | Nylon 66 | Ultramid® |
| 4LOY® 10E27200 | 4Plas | PC+ABS | 4LOY® |
| Ad-Tech Epoxy EL-315-IHL | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Flontech® FT-WM20-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Lustran® ABS 1146 | INEOS ABS (USA) | ABS | Lustran® ABS |
