Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ UF006H compound
| Category: | PPA , Polyphthalamide |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PiylLM_LNPTHERMOCOMPUF006Hcompound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOCOMP UF006H is a compound based on Polyphthalamide resin containing Glass Fiber. Also known as: LNP* THERMOCOMP* Compound UF-1006 Product reorder name: UF006H |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.53 | g/cm³ | ASTM D792 |
| -- | 1.52 | g/cm³ | ISO 1183 |
| Molding Shrinkage | |||
| Flow : 24 hours | 0.40 | % | ASTM D955 |
| Transverse flow : 24 hours | 0.80 | % | ASTM D955 |
| Vertical flow direction : 24 hours | 0.77 | % | ISO 294-4 |
| Flow direction : 24 hours | 0.37 | % | ISO 294-4 |
| Water Absorption (24 hr, 50% RH) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 13100 | MPa | ASTM D638 |
| -- | 12400 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield | 225 | MPa | ASTM D638 |
| Yield | 208 | MPa | ISO 527-2 |
| Fracture | 225 | MPa | ASTM D638 |
| Fracture | 208 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Yield | 2.2 | % | ASTM D638 |
| Yield | 2.0 | % | ISO 527-2 |
| Fracture | 2.2 | % | ASTM D638 |
| Fracture | 2.0 | % | ISO 527-2 |
| Flexural Modulus | 11000 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | |||
| -- | 290 | MPa | ASTM D790 |
| -- | 294 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 110 | J/m | ASTM D256 |
| 23°C 2 | 11 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 680 | J/m | ASTM D4812 |
| 23°C 3 | 47 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Energy at Peak Load | 7.30 | J | ASTM D3763 |
| -- | 3.70 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, unannealed, 3.20mm | 305 | °C | ASTM D648 |
| 0.45 MPa, unannealed, 64.0mm span 4 | 293 | °C | ISO 75-2/Bf |
| 1.8 MPa, unannealed, 3.20mm | 288 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 64.0mm span 5 | 282 | °C | ISO 75-2/Af |
| Linear thermal expansion coefficient | |||
| Flow : -40 to 40°C | 5.0E-5 | cm/cm/°C | ASTM E831 |
| Flow : -40 to 40°C | 5.1E-5 | cm/cm/°C | ISO 11359-2 |
| Lateral : -40 to 40°C | 2.9E-5 | cm/cm/°C | ASTM E831 |
| Lateral : -40 to 40°C | 2.8E-5 | cm/cm/°C | ISO 11359-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Rear Temperature | 310 - 321 | °C | |
| Middle Temperature | 316 - 327 | °C | |
| Front Temperature | 327 - 338 | °C | |
| Processing (Melt) Temp | 316 - 332 | °C | |
| Mold Temperature | 149 - 171 | °C | |
| Back Pressure | 0.172 - 0.344 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 mm |
| 5 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 6010MI2 | Salflex Polymers Ltd. | TPO (POE) | Salflex |
| Akulon® Ultraflow K-FHG8 | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
| PELPRENE™ S3002 | TOYOBO America, Inc. | TPEE | PELPRENE™ |
| POLYCOMPO PP S119 | POLYCOMPO Co.,Ltd. | PP, Unspecified | POLYCOMPO PP |
| NORYL™ WCV072 resin | SABIC Innovative Plastics | PPE+PS+PP | NORYL™ |
