Order Products : sales@su-jiao.com
Formolene® 5143S
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PgheRq_Formolene-5143S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 5143S is a higher melt flow homopolymer designed for light weighting of components. Its very high stiffness enables reduction of side walls and component weights without loss of top loading strength. It permits faster cycle times both in the extrusion and forming phases which can result in better process efficiencies. It is an excellent choice for ‘see-through' house wares and rigid packaging. Formolene® 5143S has been formulated without components containing animal derivatives. Formolene® 5143S meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 39.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 7.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 2000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 130 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 8221-85M300 | ExxonMobil Chemical | TPV | Santoprene™ |
| Thermoset Plastics 300 No.70 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| UBE Polyethylene B128 | UBE America, Inc. | PE, Unspecified | UBE Polyethylene |
| ALCUDIA® LDPE 3235FG | REPSOL | LDPE | ALCUDIA® LDPE |
| ISOTHANE® 1085A-E | Great Eastern Resins Industrial Co Ltd (GRECO) | TPU-Polyester | ISOTHANE® |
