Order Products : sales@su-jiao.com

Fortron® ICE 714A

Category:	PPS , Polyphenylene Sulfide
Manufacturer:	Celanese Corporation
Trademark:	Fortron®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PfrgAr_Fortron-ICE-714A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Fortron ICE 714A is a faster crystallizing version of Fortron 6165A4. It offers similar characteristics to the 6165A4 with improved processing that improves crystallization efficiency and reduces cycle time.

General Information
Filler / Reinforcement	Glass \Mineral
Features	Workability, good Fast molding cycle

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--	2.00	g/cm³	ASTM D792
--	1.95	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)	7.5	g/10 min	ASTM D1238
Molding Shrinkage
Flow	0.10 - 0.20	%	ASTM D955
Transverse flow	0.30 - 0.50	%	ASTM D955
Vertical flow direction	0.30 - 0.70	%	ISO 294-4
Flow direction	0.20 - 0.60	%	ISO 294-4
Water Absorption (Saturation, 23°C)	0.020	%	ISO 62

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness
Class m	100		ASTM D785
M scale	100		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	19000	MPa	ISO 527-2/1A/1
Tensile Strength
Fracture, 23°C	131	MPa	ASTM D638
Fracture	130	MPa	ISO 527-2/1A/5
Tensile Elongation
Fracture, 23°C	1.3	%	ASTM D638
Fracture	1.2	%	ISO 527-2/1A/5
Flexural Modulus (23°C)	18800	MPa	ISO 178
Flexural Stress	210	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-30°C	7.0	kJ/m²	ISO 179/1eA
23°C	7.0	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength			ISO 179/1eU
-30°C	20	kJ/m²	ISO 179/1eU
23°C	20	kJ/m²	ISO 179/1eU
Notched Izod Impact			ISO 180/1A
-30°C	6.0	kJ/m²	ISO 180/1A
23°C	6.0	kJ/m²	ISO 180/1A
Unnotched Izod Impact Strength (23°C)	20	kJ/m²	ISO 180/1U

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
0.45 MPa, not annealed	280	°C	ASTM D648
1.8 MPa, not annealed	266	°C	ASTM D648
1.8 MPa, not annealed	270	°C	ISO 75-2/A
8.0 MPa, not annealed	215	°C	ISO 75-2/C
Glass Transition Temperature ¹	90.0	°C	ISO 11357-2
Melting Temperature ²	280	°C	ISO 11357-3
Linear thermal expansion coefficient			ISO 11359-2
Flow	1.9E-5	cm/cm/°C	ISO 11359-2
Lateral	2.4E-5	cm/cm/°C	ISO 11359-2

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.0E+15	ohms	IEC 60093
Volume Resistivity
--	1.0E+16	ohms·cm	ASTM D257
--	> 1.0E+17	ohms·cm	IEC 60093
Dielectric Strength	25	kV/mm	IEC 60243-1
Dielectric Constant
1 kHz	5.40		ASTM D150
1 MHz	5.60		ASTM D150, IEC 60250
Dissipation Factor
1 kHz	1.0E-3		ASTM D150
1 MHz	9.0E-4		ASTM D150
1 MHz	2.0E-3		IEC 60250
Arc Resistance	182	sec	ASTM D495
Comparative Tracking Index	175	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.750 mm	V-0		UL 94
1.50 mm	V-0		UL 94
3.00 mm	5VA		UL 94
Oxygen Index	53	%	ISO 4589-2

Fill Analysis	Nominal Value	Unit	Test Method
Specific Heat Capacity of Melt	1600	J/kg/°C	Internal method

Injection	Nominal Value	Unit
Drying Temperature	130 - 140	°C
Drying Time	3.0 - 4.0	hr
Suggested Max Moisture	0.020	%
Hopper Temperature	20.0 - 30.0	°C
Rear Temperature	290 - 300	°C
Middle Temperature	310 - 320	°C
Front Temperature	330 - 340	°C
Nozzle Temperature	310 - 330	°C
Processing (Melt) Temp	330 - 340	°C
Mold Temperature	90.0 - 160	°C
Injection Pressure	50.0 - 100	MPa
Injection Rate	Fast
Holding Pressure	30.0 - 70.0	MPa
Back Pressure	0.00 - 3.00	MPa
Screw Speed	50 - 120	rpm

Injection instructions
Manifold Temperature: 330 to 340°CZone 4 Temperature: 330 to 340°CFeed Temperature: 60 to 80°C

Note Message
1 .	10°C/min
2 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
PONACOM PS 5370	Ponachem Compound GmbH	PS (HIPS)	PONACOM PS
Unipren® Elastomers A3 CRLA010 65D EG06S1 UP344	Petropol Industry and Trade of Polymers LTDA	SBC	Unipren® Elastomers
Chemlon® 233 GV	Teknor Apex Company (Chem Polymer)	Nylon 6	Chemlon®
Kelon® B FR H2 CEG/500-V0CT3	LATI S.p.A.	Nylon 6	Kelon® B
PLUSTEK RA301G6	Polyram Ram-On Industries	Nylon 66	PLUSTEK