Order Products : sales@su-jiao.com
UBESTA 3030XA
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBESTA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PfDbye_UBESTA3030XA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High viscosity (Extrusion) |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183 |
| Molding Shrinkage | Internal method | ||
| Vertical flow direction | 1.5 | % | Internal method |
| Flow direction | 0.60 | % | Internal method |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.70 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 47.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 50 | % | ISO 527-2 |
| Flexural Modulus | 1500 | MPa | ISO 178 |
| Flexural Stress | 59.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 18 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 90.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 45.0 | °C | ISO 75-2/A |
| CLTE - Flow | 1.3E-4 | cm/cm/°C | ISO 11359-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PEI-G30 | Polymer Resources Ltd. | PEI | PRL |
| TRISTAR® PC-06 | Polymer Technology and Services, LLC | PC | TRISTAR® |
| Halar® 6514 | Solvay Specialty Polymers | ECTFE | Halar® |
| OmniLon™ PA6/6 IM4 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| LNP™ LUBRICOMP™ OCP34E compound | SABIC Innovative Plastics | PPS, Linear | LNP™ LUBRICOMP™ |
