Tecnoflon® PL 458

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PbxB2P_Tecnoflon-PL-458.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Tecnoflon® PL 458 is a new generation low post cure peroxide curable fluoroelastomer. Tecnoflon® PL 458 exhibits both excellent low temperature flexibility (TR10 = -24°C) and outstanding resistance to a variety of chemicals. As all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles. Some of the basic properties of Tecnoflon® PL 458 are: Excellent low temperature flexibility Low volume swell in methanol-based fuels Low post cure Superior mould flow Lack of mould fouling Excellent mould release Tecnoflon® PL 458 can be used for injection, compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 458 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

Message

Tecnoflon® PL 458 is a new generation low post cure peroxide curable fluoroelastomer. Tecnoflon® PL 458 exhibits both excellent low temperature flexibility (TR10 = -24°C) and outstanding resistance to a variety of chemicals. As all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles.

Some of the basic properties of Tecnoflon® PL 458 are:

Excellent low temperature flexibility

Low volume swell in methanol-based fuels

Low post cure

Superior mould flow

Lack of mould fouling

Excellent mould release

Tecnoflon® PL 458 can be used for injection, compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 458 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

General Information
Features	Fast Cure Good Chemical Resistance Good Flow Good Mold Release Good Processability Low Temperature Flexibility
Uses	Belts/Belt Repair Blending Gaskets Hose Low Temperature Applications Profiles Seals Sheet
Appearance	Translucent
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	23	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
MALAT 04G192 NAT	AD majoris	Polyester, TP	MALAT
Borealis PP BE677AI	Borealis AG	PP Copolymer	Borealis PP
Garaflex™ E 4762-A5 NAT LCF	AlphaGary	TPE	Garaflex™ E
Hostacom LPX 1702 100015	LyondellBasell Industries	PP Copolymer	Hostacom
Durethan® BM 240 H2.0 901510	LANXESS Corporation	Nylon 6	Durethan®