Dyna-Purge® M

Category: Proprietary , Proprietary
Manufacturer: Dyna-Purge, division of Shuman Plastics
Trademark: Dyna-Purge®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: PbYrhl_Dyna-Purge-M.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Most versatile & widely used in the Plastics Industry

DYNA-PURGE M is a versatile non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to flow naturally through the barrel and hot runner system of the injection molding machine, as well as extrusion equipment. Two non-melting but softening thermoplastic ingredients scrub, while an exclusive proprietary additive helps to remove any contamination without leaving a residue.

FEATURES & BENEFITS:
  • Developed for color changes, resin changes, preventative machine maintenance and before manual cleaning
  • Excellent for purging through hot runner systems with a minimum clearance of 0.030 inch (0.75 mm)
  • Effective through a wide temperature range 350°F to 600°F(177°C to 315°C)
  • Easy to use - no process adjustment necessary - use at the resident resin processing temperature and RPM speed
  • Non-abrasive, non-melting but softening thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system
  • Safe, non-hazardous, with no chemicals - ingredients are FDA compliant
  • Heat stable - recommended during shutdown and start-up
  • Low "cost-per-purge" - only small quantity needed to be effective
  • No mixing required - simply use "as is"
  • Unlimited shelf life
General Information
Uses
  • Cleaning compound
Agency Ratings
  • FDA not rated
Forms
  • Particle
Processing Method
  • Compound extrusion
  • Extrusion
  • Extrusion blow molding
  • Sheet extrusion molding
  • Profile extrusion molding
  • Injection molding
Additional Information
Applications: Injection - cold and hot runners Extrusion - profile, sheet, compounding & blow molding Temperature Range: 350 - 600°F (177 - 315°C) Types of Resins: All Minimum Clearance: 0.030 inch or 0.75 mm Amount of Purge: 1 to 2 times barrel capacity (actual amount needed depends on machine conditions)
Resin Grade Manufacturer Category Trademark
RTP 207 TFE 15 RTP Company Nylon 66 RTP
ALCOM® PA66 910/1.1 CF20 ALBIS PLASTIC GmbH Nylon 66 ALCOM® PA66
Borealis PP HD234CF Borealis AG PP Homopolymer Borealis PP
Tunhe PBS TH804 Xinjiang Blueridge Tunhe Chemical Industry Co.,Ltd PBS Tunhe PBS
ESTOPLAST EP 2030BB12 Ester Industries Ltd. PBT ESTOPLAST EP