Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic PFA 6515TZ

Category:	PFA , Perfluoroalkoxy
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PVaGU1_3M-Dyneon-Fluoroplastic-PFA-6515TZ.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ Fluoroplastic PFA 6515TZ (a fully fluorinated copolymer of tetrafluoroethylene and perfluorovinylether) has exceptional heat resistance, excellent electrical properties and excellent chemical and weather resistance.

Features

Wide service temperature range

Excellent, almost universal resistance to solvents and chemicals

Extremely high weathering resistance and UV stability

Excellent electrical insulation properties, e.g.: dielectric breakdown strength, dielectric constant

High limiting oxygen index: Does not support combustion

Smooth surfaces

Good non-stick characteristics

Good low-friction properties

Broad processing window

Improved mold release property

Improved stress crack resistance

High transparency

General Information
Features	Copolymer Good Chemical Resistance Good Electrical Properties Good Mold Release Good UV Resistance Good Weather Resistance High Heat Resistance Low Friction Medium Clarity Non-Stick Solvent Resistant
Uses	Wire & Cable Applications
Forms	Pellets
Processing Method	Injection Molding Wire & Cable Extrusion

Physical	Nominal Value	Unit	Test Method
Density	2.15	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)	15	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	60		ASTM D2240, ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break, 23°C)	28.0	MPa	ISO 527-1
Tensile Strain (Break, 23°C)	420	%	ISO 527-1
Flexural Modulus	620	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	308	°C	ISO 12086

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	> 95	%	ASTM D2863

Injection	Nominal Value	Unit
Processing (Melt) Temp	250 to 400	°C

Extrusion	Nominal Value	Unit
Melt Temperature	< 400	°C

Resin Grade	Manufacturer	Category	Trademark
Premi-Ject® 6100-18	Premix, Inc.	TS, Unspecified	Premi-Ject®
HAIPLEN H30 G4 BA	Taro Plast S.p.A.	PP Homopolymer	HAIPLEN
POLYfill PPC BGK601213 CR	Polykemi AB	PP Copolymer	POLYfill
ESTOPLAST EP 2030BB11	Ester Industries Ltd.	PBT	ESTOPLAST EP
Sylvin 5150-80 Yellow 4150	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin