Order Products : sales@su-jiao.com
Integra™ PC-5017 U
| Category: | PC , Polycarbonate |
| Manufacturer: | PolySource, LLC |
| Trademark: | Integra™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PVKw9G_IntegraPC5017U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polycarbonate, ultra low viscosity, UV |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 34 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 0.50 - 0.70 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.15 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 66.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 130 | % | ASTM D638 |
| Flexural Modulus | 2250 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 93.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 750 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 130 | °C | ASTM D648 |
| CLTE - Flow | 5.0E-5 - 7.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 4.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 30 | kV/mm | ASTM D149 |
| Arc Resistance | 120 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.6 mm) | V-2 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 235 - 260 | °C | |
| Middle Temperature | 250 - 275 | °C | |
| Front Temperature | 265 - 290 | °C | |
| Nozzle Temperature | 265 - 300 | °C | |
| Processing (Melt) Temp | 265 - 300 | °C | |
| Mold Temperature | 65 - 105 | °C | |
| Back Pressure | 0.250 - 0.703 | MPa | |
| Screw Speed | 40 - 70 | rpm | |
| Vent Depth | 0.020 - 0.079 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BorPure™ MB6561 | Borealis AG | HDPE | BorPure™ |
| Chemical Resources RPP 400CW | Chemical Resources, Inc. | PP Random Copolymer | Chemical Resources |
| Gallonprene® GP420-8507 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Dutral® CO 043 | Versalis S.p.A. | EPDM | Dutral® |
| Hifax ETA3041 | LyondellBasell Industries | TPO (POE) | Hifax |
