Order Products : sales@su-jiao.com
Sinpolene TPP5540/2D
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | SINPOLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PUiXlm_SinpoleneTPP55402D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SINPOLENE TPP5540/2D is a premium talc reinforced polypropylene thermoplastic extrusion compound. It is UV stabilized and has good balance of mechanical and physical properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.70 - 0.90 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 30 | % | ASTM D638 |
| Flexural Modulus | 2600 | MPa | ASTM D790 |
| Flexural Strength | 45.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 58 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 133 | °C | ASTM D648 |
| Vicat Softening Temperature | 155 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPTON™ 2006 | Kuraray Co., Ltd. | SEPS | SEPTON™ |
| NEMCON H PO DP117/X2 | Ovation Polymers Inc. | PEEK | NEMCON H |
| Nymax™ GF1200 A15 NC011 | PolyOne Corporation | Nylon 66 | Nymax™ |
| BESTPOM H14/01 | Triesa Plastics | Acetal (POM) Homopolymer | BESTPOM |
| INEOS PP 194-NA25 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
