Order Products : sales@su-jiao.com
Resinoid 2215
| Category: | Phenolic , Phenolic |
| Manufacturer: | Resinoid Engineering Corporation |
| Trademark: | Resinoid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PUT7PV_Resinoid-2215.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Resinoid 2215 is an organic fiber reinforced compound offering moderate impact strength. This product is available in a small pellet suitable for compression, transfer and injection molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792A, ISO 1183 |
| Water Absorption | |||
| 24 hr | 0.50 | % | ASTM D570 |
| 23°C, 24 hr | 0.50 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield | 48.3 | MPa | ASTM D638 |
| Yield | 48.0 | MPa | ISO 527-2 |
| Flexural Modulus | |||
| -- | 9650 | MPa | ASTM D790 |
| -- | 9700 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 79.3 | MPa | ASTM D790 |
| -- | 79.0 | MPa | ISO 178 |
| Compressive Strength | 179 | MPa | ASTM D695, ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -- | 37 | J/m | ASTM D256A |
| -- | 3.7 | kJ/m² | ISO 180/2A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 199 | °C | ASTM D648, ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | |||
| -- | 7.9 | kV/mm | ASTM D149 |
| -- | 8.7 | kV/mm | IEC 60243-1 |
| Arc Resistance | 100 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (6.35 mm) | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 BT | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Mowiol® 56-98 low ash | Kuraray Co., Ltd. | PVOH | Mowiol® |
| CompaDur® 121 GF 15 natural (050) | DimeLika Plast GmbH | PBT | CompaDur® |
| GERMADUR N | Kunststoff-Kontor-Hamburg GmbH | PBT | GERMADUR |
| Lucofin® 1412-t3 | Lucobit AG | Polyolefin, Unspecified | Lucofin® |
