Order Products : sales@su-jiao.com
Generic PP, HMS
| Category: | PP, HMS , High Melt Strength Polypropylene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PR77xh_Generic-PP-HMS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP, HMS This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.32 to 4.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 91 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 25.9 to 37.2 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 8.0 to 13 | % | ASTM D638 |
| Flexural Modulus (23°C) | 879 to 1730 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 to 690 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 94.9 to 114 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 700 SI | RTP Company | HDPE | RTP |
| VITAMIDE® BF10GY6070 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Wanthane® WHT-8180 | Wanhua Chemical Group Co., Ltd. | TPU-Polyether | Wanthane® |
| Nylene® 132 V0 30 | Custom Resins Group | Nylon 66 | Nylene® |
| Plantic® WR702 | Plantic Technologies Limited | Biodeg Polymers | Plantic® |
