Order Products : sales@su-jiao.com
Dryflex® PCW 91A701B
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PQzW3H_Dryflex-PCW-91A701B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex PCW 91A701B: Thermoplastic Elastomer Base Material: TPO Hardness: 91 Shore A Service Temperature Range: -50 to +120°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE Special Features: This grade contains approximately 70% by weight of Post Consumer Waste |
| General Information | |
|---|---|
| Recycled Content |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 2781 |
| Molding Shrinkage 1 | 0.75 to 2.0 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 91 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 7.10 | MPa | ISO 37 |
| Tensile Elongation (Break) | 40 | % | ISO 37 |
| Tear Strength 2 | 110 | kN/m | ISO 34-1 |
| Compression Set 3 | ISO 815 | ||
| 23°C, 24 hr | 52 | % | |
| 70°C, 23 hr | 76 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 to 200 | °C | |
| Middle Temperature | 170 to 200 | °C | |
| Front Temperature | 170 to 200 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Depending on e.g. shape of the detail and placement of gate |
| 2 . | Method C, Crescent |
| 3 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B30 NC100 | NUREL, S.A. | Nylon 6 | Promyde® |
| Tuftec™ P1083 | AKelastomers | SEBS | Tuftec™ |
| CGPC PVC SO-30X (30 phr Plasticizer A) | China General Plastics Corporation | PVC, Flexible | CGPC PVC |
| Chemlon® 100 X | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| LUVOCOM® 19-7276 VP | Lehmann & Voss & Co. | Nylon 46 | LUVOCOM® |
