Order Products : sales@su-jiao.com
DuraGrip® DGR 6140NC
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | DuraGrip® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PQMggW_DuraGrip-DGR-6140NC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DuraGrip® 6140NC is an enhanced bonding and adhesion grade Thermoplastic Elastomer (TPE) designed for injection molding and extrusion processes. It will bond well with polycarbonate, polycarbonate alloys, ABS, ASA, acrylics, cellulosics, and some nylons in insert molding, coinjection molding and coextrusion processes. DuraGrip® 6140NC is hygroscopic and requires drying at 150°F for 3-4 hours for optimum aesthetics, properties and adhesion. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792, ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 45 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412, ISO 37 | ||
| 100% strain | 1.17 | MPa | ASTM D412, ISO 37 |
| 300% strain | 2.07 | MPa | ASTM D412, ISO 37 |
| Tensile Strength (Yield) | 2.96 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 410 | % | ASTM D412, ISO 37 |
| Tear Strength 1 | 16.5 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C, 294 sec^-1) | 374 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| The value listed as Density -Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.The value listed as Density, ISO 1183, was tested in accordance with ISO 2781. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 204 - 221 | °C | |
| Middle Temperature | 216 - 227 | °C | |
| Front Temperature | 227 - 238 | °C | |
| Nozzle Temperature | 227 - 249 | °C | |
| Processing (Melt) Temp | 227 - 254 | °C | |
| Mold Temperature | 43.3 - 54.4 | °C | |
| Injection Pressure | 2.76 - 5.52 | MPa | |
| Screw Speed | 50 - 150 | rpm |
| Injection instructions |
|---|
| Injection Speed: 1 to 3 in³/secInjection Time (1st Stage/Boost): 0.5 to 4 secSecond Stage Pressure: 300 to 500 psiSecond Stage Time: 3 to 10 secCooling Time: 10 to 25 secBack Pressure: 25 to 75 % |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 303 TFE 10 | RTP Company | PC | RTP |
| Sylvin RP 3301 Natural | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
| Absolan® 2150 | Styrolution | SAN | Absolan® |
| EcolGreen EGN100 | EcolBiotech Co., Ltd | PLA | EcolGreen |
| PENTESTER ET GV20 L H RC schwarz | PENTAC Polymer GmbH | PET | PENTESTER ET |
