Order Products : sales@su-jiao.com
LubriOne™ SF2-30CF/15T Natural
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | PolyOne Corporation |
| Trademark: | LubriOne™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PNyw1P_LubriOne-SF2-30CF-15T-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LubriOne™ Lubricated and Wear-Resistant Compounds have been specifically formulated to be self-lubricating materials, offering low coefficient of friction and improved wear resistance properties. LubriOne compounds have been demonstrated to reduce friction, noise, vibration, heat buildup and improve product durability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 to 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 27600 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 179 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 1.0 to 2.0 | % | ASTM D638 |
| Flexural Modulus 4 | 23100 | MPa | ASTM D790 |
| Flexural Strength 5 | 283 | MPa | ASTM D790 |
| Coefficient of Friction | ASTM D1894 | ||
| vs. Steel - Dynamic | 0.35 | ||
| vs. Steel - Static | 0.25 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.35 mm, Injection Molded) | 59 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | > 245 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Processing (Melt) Temp | 316 to 332 | °C | |
| Mold Temperature | 93.3 to 149 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 5.1 mm/min |
| 2 . | 5.1 mm/min |
| 3 . | Type I, 5.1 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong Aobang TPU-Polyester 75-A | Shandong Aobang Chemical Technology Co.,Ltd. | TPU-Polyester | Shandong Aobang TPU-Polyester |
| NEXT SIGNATURE PBT G30-300 | NEXT Specialty Resins, Inc. | PBT | NEXT SIGNATURE |
| ALTECH® PA66 A 2030/588 GF30LS BK0004-00LS | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| EMAREX® 400 GF43 | MRC Polymers, Inc. | Nylon 66 | EMAREX® |
| KOPA® KN333G30CR | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
