Order Products : sales@su-jiao.com
Gallonprene® GP200-7Q
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PNRkXN_Gallonprene-GP200-7Q.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP200-7Q is a thermoplastic elastomer (TPE) product,. It can be processed by injection molding and is available in Africa and the Middle East, Latin America or Asia Pacific. Typical application areas are: consumer goods. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.828 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (150°C/0.325 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shaw OO, 23°C) | 7 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | > 1.40 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | > 1500 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 120 - 140 | °C | |
| Middle Temperature | 130 - 150 | °C | |
| Front Temperature | 140 - 160 | °C | |
| Processing (Melt) Temp | 90.0 - 110 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Slow |
| Injection instructions |
|---|
| Processing Temperature Limit: 260°CInjection Pressure: LowBack Pressure: 10 to 30% |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 TFE 15 HS FR | RTP Company | Nylon 66 | RTP |
| RJM EC 102F1 | RJM International, Inc. | PC | RJM |
| Moplen EP442M | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| ALCOM® PC 740/4 UV CC1323-08LG | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Andur 8-5 APLS/Curene® 49 | Anderson Development Company | PUR-Ester/TDI | Andur |
