Order Products : sales@su-jiao.com
Generic PP+EPDM - Mineral
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PMhIQO_Generic-PP-EPDM---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP+EPDM - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.958 to 1.10 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 to 25 | g/10 min | ISO 1133 |
| Molding Shrinkage (23°C) | 0.90 to 1.3 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (23°C) | 18.0 to 26.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield, 23°C | 5.0 to 9.0 | % | |
| Break, 23°C | 16 to 100 | % | |
| Flexural Modulus (23°C) | 750 to 2500 | MPa | ISO 178 |
| Flexural Stress (23°C) | 24.9 to 45.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 10 to 29 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 72.3 to 125 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 52.5 to 149 | °C | ISO 306 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPTON™ 2063 | Kuraray Co., Ltd. | SEPS | SEPTON™ |
| ENVIROPLAS® ENV13-NC160 | ENVIROPLAS®, Inc. | PC | ENVIROPLAS® |
| EPIMIX PBT/PET GFU 30 NC | EPSAN Plastik SAN. ve TiC. A.S. | PBT+PET | EPIMIX |
| INNOPOL® PP CS 1-8960 | Inno-Comp Ltd. | PP Homopolymer | INNOPOL® PP |
| ALTECH® PA66 ECO 1000/617 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
