Order Products : sales@su-jiao.com
POLYFLON™ M-111
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | POLYFLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PLoG3u_POLYFLONM111.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed. There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application. Features Excellent creep resistance, high elongation, superior dielectric strength and an extremely smooth surface. Suitable for manufacturing of vessel lining, gasket, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Apparent Density | 0.36 | g/cm³ | |
| Average Particle Size | 27 | µm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| IPC PP 4820H-C | International Polymers Corporation | PP Homopolymer | IPC PP |
| Plaslube® POM CO X MB | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
| Plexar® PX2246 | LyondellBasell Industries | HDPE | Plexar® |
| Hypro-G™ PP-CP40 | Entec Polymers | PP Impact Copolymer | Hypro-G™ |
| TechnoElast S A5002 I 1 nat | TechnoCompound GmbH | TPE | TechnoElast |
