Order Products : sales@su-jiao.com
MARPOL® Homo 1.8
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® Homo |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PHZgYD_MARPOL-Homo-1-8.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Additives: None Recommended Applications: Stationery film, housewares and raffia/tapes/strapping. Also good for clear and opaque containers. MARPOL® Homo 1.8 is a low-flow polypropylene homopolymer resin available in pellet form. This resin is used in general injection molding, extrusion applications and is most frequently sold into raffia markets. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792B |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.2 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus | 1530 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 52 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zetpol® 2010H | Zeon Corporation | NBR | Zetpol® |
| Addisil™ 170 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| CERTENE™ LLHF-120C | Muehlstein | LLDPE | CERTENE™ |
| Rotuba CAB B9004 (13% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
| LNP™ THERMOCOMP™ OF008E compound | SABIC Innovative Plastics | PPS | LNP™ THERMOCOMP™ |
