Order Products : sales@su-jiao.com
Boda BDF45P
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Chenguang Fluoro & Silicone Elastomers Co., Ltd. |
| Trademark: | Boda |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PDFx3f_Boda-BDF45P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BDF45P is a medium viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good hot tear resistance and fast cure rate are required. BDF45P can be compounded to meet the major fluoroelastomer specifications. BDF45P can be used for compression molding, extrusion and transfer molding of articles. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | |
| Mooney Viscosity (ML 1+10, 121°C) | 45 | MU | |
| Fluorine Content | 66 | % | |
| Solubility | LMW Ketones and esters |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| MH 1(177°C) | 2.18 | N·m | |
| ML 2(177°C) | 0.400 | N·m | |
| t'90 3(177°C) | 1.8 | min | |
| ts2 4(177°C) | 50.0 | sec |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 5(Shore A) | 74 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 6(Yield) | 14.5 | MPa | ASTM D412 |
| Tensile Elongation 7(Break) | 270 | % | ASTM D412 |
| Compression Set (200°C, 70 hr) | 20 | % | ASTM D395B |
| Additional Information |
|---|
| Test Compound: Polymer: 100 MT Black (N990): 30 phr MgO: 3 phr Ca(OH)2: 6 phr Curing Condition: Press: 10 min at 170°C Oven: 24 hr at 230°C |
| Note Message | |
|---|---|
| 1 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 2 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 3 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 4 . | MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes |
| 5 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| 6 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| 7 . | Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VYLOPET® EMC317A | TOYOBO America, Inc. | PC+PBT | VYLOPET® |
| Arnite® TV4 230 SF | DSM Engineering Plastics | PBT | Arnite® |
| Kumho STE 2172GN | Korea Kumho Petrochemical Co., Ltd. | Rubber | Kumho STE |
| PENTALLOY BP (HV) H natural | PENTAC Polymer GmbH | Nylon 6+PP | PENTALLOY BP |
| LNP™ STAT-KON™ DEL13EXC compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
