Order Products : sales@su-jiao.com

Eltex® HD5240GA-B

Category:	HDPE Copolymer , High Density Polyethylene Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	PCpHYD_Eltex-HD5240GA-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® HD5240GA-B is a high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection of caps and closures applications requiring good environmental stress-cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages.
Typical applications

Caps and closures for the packaging of juices, functionalized beverages and slightly carbonated or pressurized beverages

Benefits and Features

Easy processing

Good environmental stress cracking resistance

High impact strength

Low warpage

Grade containing slip agent ensuring easy application and opening. Exposure to direct sunlight has to be avoided as the slip agent is light sensitive and its degradation can give off-taste to the beverage.

Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing.

General Information
Additive	slip agent
Features	Ultra-high impact resistance High purity Low warpage High ESCR (Stress Cracking Resistance) Copolymer smoothness Workability, good Good sensory characteristics Narrow molecular weight distribution
Uses	Shield Shell
RoHS Compliance	Contact manufacturer
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.950	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance	13.0	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1100	MPa	ISO 527-2/1B
Tensile Stress (Yield)	25.0	MPa	ISO 527-2/1B

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (23°C)	5.5	kJ/m²	ISO 179

Additional Information
The value listed as Density ASTM D1183, was tested in accordance with ASTM D1872.The value listed as Eniro. Stress Crack Res. ASTM D1693, was tested in accordance with INEOS test methods.Organoleptic Properties, INEOS methods: OK

Resin Grade	Manufacturer	Category	Trademark
SCANAMID 66 A33^E F15	Polykemi AB	Nylon 66	SCANAMID 66
4PROP® 25C40000	4Plas	PP Copolymer	4PROP®
APICAL 120AF616	Kaneka Corporation	Film, PI	APICAL
ExxonMobil™ LDPE LD 380BA Wire & Cable	ExxonMobil Chemical	LDPE	ExxonMobil™ LDPE
Elvax® 660	DuPont Packaging & Industrial Polymers	EVA	Elvax®