Order Products : sales@su-jiao.com
Algoflon® D 1610 F
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Algoflon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PAybBf_Algoflon-D-1610-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Algoflon® D 1610 F is a PFOA-free white aqueous PTFE dispersion. It is designed for additivation of plastics and is particularly recommended for use as anti-drip in flame retardant formulations. Algoflon® D 1610 F exhibits good wetting properties and shear stability. Main features of Algoflon® D 1610 F PTFE dispersion are:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| pH | > 9.0 | ASTM D4441 | |
| Density | 1.510 | g/cm³ | ASTM D4441 |
| Average Particle Size | 250 | nm | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| PTFE content- (On the mixture) | 60.0 | wt% | ASTM D4441 |
| Nonionic surfactant- (On the mixture) | 3.5 | wt% | ASTM D4441 |
| Processing Algoflon® D 1610 F can be processed undiluted or diluted using distilled or deionized water. Storage and Handling Algoflon® PTFE dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10-25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use. Safety and Toxicology Before using Algoflon® PTFE dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods Packaging Algoflon® D 1610 F is packaged in either 30 kg drums or 1500 kg IBC's. Additional Technical Information For Material Safety Data Sheet or additional technical information consult your Solvay Specialty Polymers sales representative. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 207 A RC HS Black | RTP Company | Nylon 6 | RTP |
| Veroplas VF191 | PlastxWorld Inc. | ABS | Veroplas |
| Urochem 162 | Chemiplastica, Inc. | Urea Formald | Urochem |
| INLUBE INX-TPU-05141 | Infinity LTL Engineered Compounds | TPU, Unspecified | INLUBE |
| LNP™ THERMOTUF™ V1000SU compound | SABIC Innovative Plastics | Nylon, Unspecified | LNP™ THERMOTUF™ |
