Order Products : sales@su-jiao.com
Epocast 927-1 GB
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Huntsman Advanced Materials |
| Trademark: | Epocast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PAB8OK_Epocast-927-1-GB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DESCRIPTION: Epocast 927-1 GB epoxy syntactic is a frozen, one-component, structural material for reinforcing honeycomb parts that maintains high compressive strength at high temperatures. When thawed, the epoxy syntactic can be extruded from cartridges as a thixotropic paste. Epocast® 927-1 GB is qualified to RMS 027, type XV. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ASTM D1622 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Strength | ASTM D695 | ||
| 25°C 1 | 103 | MPa | ASTM D695 |
| 177°C 2 | 89.6 | MPa | ASTM D695 |
| 25°C | 124 | MPa | ASTM D695 |
| 177°C | 75.8 | MPa | ASTM D695 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Extrudability (25°C) | > 1000 | g/min | |
| Work Life - after thaw (25°C) | 1.0 | day | ASTM D1338 |
| Recommended cure cycle: Heat the material from room temperature at the rate of 3-4°C per minute, plus 1 hour at 177°C or 90 minutes at 121°C. Cure temperature refers to temperature of material determined by thermocouple. (Slow heat rise to 3-4°C preferred to reduce shrinkage and minimize out-gassing during cure). |
| Note Message | |
|---|---|
| 1 . | After 500 hours at 177°C |
| 2 . | After 500 hours at 177°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adiprene® LF 751D | Chemtura | PUR-Ether/TDI | Adiprene® |
| AKROMID® A3 GK 30 black (2306) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Escorene™ Ultra FL 01418 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| JSR EPR EP801E | JSR Corporation | EPDM | JSR EPR |
| KEBAFORM® C 270.0 | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
