Order Products : sales@su-jiao.com
COSMOTHENE® EVA H2020
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | TPC, The Polyolefin Company (Singapore) Pte Ltd |
| Trademark: | COSMOTHENE® EVA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | P8crfp_COSMOTHENE-EVA-H2020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
COSMOTHENE EVA is produced by the latest autoclave process technology licensed by Sumitomo Chemical Co. Japan. COSMOTHENE EVA have good processability, tough, elastic, good ESCR and good low temperature resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 1.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | > 300 | hr | ASTM D1693 |
| Vinyl Acetate Content | 15.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 30 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 21.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Apparent Bending Modulus | 58.8 | MPa | ASTM D747 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 68.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL4F 801 | Marco Polo International, Inc. | LLDPE | MARPOL® |
| SLOVAMID® 66 GF 10 FRA 3 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| FM® 385 | Cytec Industries Inc. | Epoxy | FM® |
| 3M™ Dyneon™ Fluoroplastic FEP FLEX6305Z | 3M Advanced Materials Division | FEP | 3M™ Dyneon™ Fluoroplastic |
| Novalloy-A A2604 | PlastxWorld Inc. | ABS+Nylon | Novalloy-A |
