Order Products : sales@su-jiao.com
ETILINAS HD12BK
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | POLYETHYLENE MALAYSIA SDN BHD |
| Trademark: | ETILINAS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | P6FW5i_ETILINAS-HD12BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ETILINAS HD12BK is designed specifically for the manufacture of pressure pipe and pipe fittings for use in potable water, drainage, sewage and slurry pipeline systems. ETILINAS HD12BK is based on a special high density copolymer with excellent resistance to environmental stress cracking and abrasion, and meets the ISO classification PE80 for pipe materials. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.951 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.58 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (F0) | 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 23.0 | MPa | ISO 527-2/2 |
| Tensile Strain (Break) | 600 | % | ISO 527-2/2 |
| Flexural Modulus | 850 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 120 | °C | ISO 306/A |
| CLTE - Flow (20 to 60°C) | 1.5E-4 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| Density of Compound, ISO 1872/1, Annealed: 953 kg/m³Carbon Black Content, ISO 6964: 2.25%Minimum Required Strength (MRS), ISO TR9080, 97.5% LCL: 8.0 MPaThermal Conductivity, BS 874, 23°C: 0.4 W/m/°CVolume Resistivity, BS 2782:23A: >1e13 ohm-cmOxidation Induction Time, ISO TR10837, 200°C: >40 minOxidation Induction Time, ISO TR10837, 210°C: >20 min |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 - 230 | °C |
| Extrusion instructions |
|---|
| Suggested Screen Pack: 40/80 Mesh |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac® 250-SG5 | Toray Resin Company | ABS | Toyolac® |
| Fainplast PVC KL 95/3 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Electrafil® PBT GF10 SS5 MB | Techmer Engineered Solutions | PBT | Electrafil® |
| INLUBE POMCCF20TF15 | Infinity LTL Engineered Compounds | Acetal (POM) Copolymer | INLUBE |
| LNP™ LUBRICOMP™ EFL36XXC compound | SABIC Innovative Plastics | PEI | LNP™ LUBRICOMP™ |
